GdPicture.NET.14
GdPicture14 Namespace / GdPicturePDF Class / DrawWrappedText Method
The resource name of the font you prefer for drawing your text.

You can easily obtain this name using the AddStandardFont method or any of the AddTrueTypeFont...() methods. For further assistance, please see the section Fonts of the GdPicturePDF class in the Reference Guide.

The horizontal (X) coordinate of the closest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
The vertical (Y) coordinate of the closest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
The horizontal (X) coordinate of the furthest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
The vertical (Y) coordinate of the furthest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
The required horizontal text alignment mode, that is used to draw text within the specified rectangle.
The required text to draw.
Set this parameter to true if you want to calculate the line height by using the font boundary box. It is an imaginary box that encloses all glyphs from the font, usually as tightly as possible.

Set this parameter to false if you want to calculate the line height by using the font's ascent and descent properties. The ascent property is the distance from the baseline to the highest grid coordinate used to place an outline point, the descent property to the lowest grid coordinate.

It is both the input and the output parameter.

As the input parameter it sets the position of the first character from the specified text you want to start with when drawing.

As the output parameter it returns the position of the character that has not been drawn because of the rectangle's boundaries or -1 if the whole text has been wrapped successfully to fit the specified rectangle.

Example





In This Topic
DrawWrappedText Method (GdPicturePDF)
In This Topic
Draws, in other words, wraps, required text using the specified font to fit the defined rectangle located on the currently selected page of the loaded PDF document. You need to set the rectangle coordinates in the current units with respect to the currently located origin defined in the PDF document, at the same all coordinates are related to the actual page, where the text is to be drawn. You are also allowed to specify the text alignment within the defined rectangle and the calculation of the height of the text line. The aim of this method is to respect the rectangle boundaries when drawing text, not to draw entire text.

You can use the GetMeasurementUnit method to determine the currently defined units together with the GetOrigin method to determine the current origin location and you can also use the SetMeasurementUnit method to reset the units together with the SetOrigin method to reset the origin location according to your preference.

Syntax
'Declaration
 
Public Function DrawWrappedText( _
   ByVal FontResName As String, _
   ByVal Left As Single, _
   ByVal Top As Single, _
   ByVal Right As Single, _
   ByVal Bottom As Single, _
   ByVal HorizontalAlignment As TextAlignment, _
   ByVal Text As String, _
   ByVal UseFontBBox As Boolean, _
   ByRef StartPos As Integer _
) As GdPictureStatus
public GdPictureStatus DrawWrappedText( 
   string FontResName,
   float Left,
   float Top,
   float Right,
   float Bottom,
   TextAlignment HorizontalAlignment,
   string Text,
   bool UseFontBBox,
   ref int StartPos
)
public function DrawWrappedText( 
    FontResName: String;
    Left: Single;
    Top: Single;
    Right: Single;
    Bottom: Single;
    HorizontalAlignment: TextAlignment;
    Text: String;
    UseFontBBox: Boolean;
   var  StartPos: Integer
): GdPictureStatus; 
public function DrawWrappedText( 
   FontResName : String,
   Left : float,
   Top : float,
   Right : float,
   Bottom : float,
   HorizontalAlignment : TextAlignment,
   Text : String,
   UseFontBBox : boolean,
   StartPos : int
) : GdPictureStatus;
public: GdPictureStatus DrawWrappedText( 
   string* FontResName,
   float Left,
   float Top,
   float Right,
   float Bottom,
   TextAlignment HorizontalAlignment,
   string* Text,
   bool UseFontBBox,
   ref int StartPos
) 
public:
GdPictureStatus DrawWrappedText( 
   String^ FontResName,
   float Left,
   float Top,
   float Right,
   float Bottom,
   TextAlignment HorizontalAlignment,
   String^ Text,
   bool UseFontBBox,
   int% StartPos
) 

Parameters

FontResName
The resource name of the font you prefer for drawing your text.

You can easily obtain this name using the AddStandardFont method or any of the AddTrueTypeFont...() methods. For further assistance, please see the section Fonts of the GdPicturePDF class in the Reference Guide.

Left
The horizontal (X) coordinate of the closest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
Top
The vertical (Y) coordinate of the closest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
Right
The horizontal (X) coordinate of the furthest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
Bottom
The vertical (Y) coordinate of the furthest point to the currently defined origin, where the text box is located, in the current units used in the PDF document, related to the currently selected page.
HorizontalAlignment
The required horizontal text alignment mode, that is used to draw text within the specified rectangle.
Text
The required text to draw.
UseFontBBox
Set this parameter to true if you want to calculate the line height by using the font boundary box. It is an imaginary box that encloses all glyphs from the font, usually as tightly as possible.

Set this parameter to false if you want to calculate the line height by using the font's ascent and descent properties. The ascent property is the distance from the baseline to the highest grid coordinate used to place an outline point, the descent property to the lowest grid coordinate.

StartPos
It is both the input and the output parameter.

As the input parameter it sets the position of the first character from the specified text you want to start with when drawing.

As the output parameter it returns the position of the character that has not been drawn because of the rectangle's boundaries or -1 if the whole text has been wrapped successfully to fit the specified rectangle.

Return Value

A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.

We strongly recommend always checking this status first.

Remarks
This method is only allowed for use with non-encrypted documents.

Be aware that the values of coordinates and dimensions are expressed in the current units defined by the SetMeasurementUnit method according to the current coordinate space defined by the SetOrigin method.

Example
How to draw required text to be centered within the specified rectangle. The example also shows you what the StartPos parameter actually indicates.
Dim caption As String = "Example: DrawWrappedText"
Dim message As String = "The example has not been followed successfully." + vbCrLf + "The last known status is "
Dim gdpicturePDF As New GdPicturePDF()
Dim status As GdPictureStatus = gdpicturePDF.NewPDF()
If status = GdPictureStatus.OK Then
    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft)
    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitCentimeter)
    Dim fontName As String = gdpicturePDF.AddStandardFont(PdfStandardFont.PdfStandardFontTimesBold)
    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then
        Dim startPosDraw As Integer = 0, startPosH As Integer = 0
        Dim text As String = "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua."
        If (gdpicturePDF.NewPage(PdfPageSizes.PdfPageSizeA4) = GdPictureStatus.OK) AndAlso
           (gdpicturePDF.SetFillColor(0, 0, 255) = GdPictureStatus.OK) AndAlso
           (gdpicturePDF.SetTextSize(20) = GdPictureStatus.OK) AndAlso
           (gdpicturePDF.SetLineWidth(0.01F) = GdPictureStatus.OK) AndAlso
           (gdpicturePDF.DrawRectangle(2, 2, 6, 6, False, True) = GdPictureStatus.OK) AndAlso
           (gdpicturePDF.DrawWrappedText(fontName, 2, 2, 8, 8, TextAlignment.TextAlignmentCenter, text, False, startPosDraw) = GdPictureStatus.OK) AndAlso
           (gdpicturePDF.DrawText(fontName, 3, 9, "StartPos = " + startPosDraw.ToString()) = GdPictureStatus.OK) Then
            Dim height As Single = gdpicturePDF.GetWrappedTextHeight(fontName, 2, 2, 8, 8, TextAlignment.TextAlignmentCenter, text, False, startPosH)
            If (gdpicturePDF.GetStat() = GdPictureStatus.OK) AndAlso
               (gdpicturePDF.DrawText(fontName, 3, 11, "Height = " + height.ToString()) = GdPictureStatus.OK) Then
                startPosDraw = 0
                If (gdpicturePDF.DrawRectangle(10, 2, 6, 6, False, True) = GdPictureStatus.OK) AndAlso
                   (gdpicturePDF.DrawWrappedText(fontName, 10, 2, 16, 8, TextAlignment.TextAlignmentCenter, text, True, startPosDraw) = GdPictureStatus.OK) AndAlso
                   (gdpicturePDF.DrawText(fontName, 11, 9, "StartPos = " + startPosDraw.ToString()) = GdPictureStatus.OK) Then
                    height = gdpicturePDF.GetWrappedTextHeight(fontName, 2, 2, 8, 8, TextAlignment.TextAlignmentCenter, text, True, startPosH)
                    If (gdpicturePDF.GetStat() = GdPictureStatus.OK) AndAlso
                       (gdpicturePDF.DrawText(fontName, 11, 11, "Height = " + height.ToString()) = GdPictureStatus.OK) Then
                        status = gdpicturePDF.SaveToFile("test_DrawWrappedText.pdf")
                        If status = GdPictureStatus.OK Then
                            message = "The example has been followed successfully and the file has been saved."
                        Else
                            message = "The example has been followed successfully, but the file can't be saved. Status: " + status.ToString()
                        End If
                    Else
                        message = message + gdpicturePDF.GetStat().ToString()
                    End If
                Else
                    message = message + gdpicturePDF.GetStat().ToString()
                End If
            Else
                message = message + gdpicturePDF.GetStat().ToString()
            End If
        Else
            message = message + gdpicturePDF.GetStat().ToString()
        End If
    Else
        message = "The AddStandardFont() method has failed with the status: " + status.ToString()
    End If
Else
    message = "The NewPDF() method has failed with the status: " + status.ToString()
End If
MessageBox.Show(message, caption)
gdpicturePDF.Dispose()
string caption = "Example: DrawWrappedText";
string message = "The example has not been followed successfully.\nThe last known status is ";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
GdPictureStatus status = gdpicturePDF.NewPDF();
if (status == GdPictureStatus.OK)
{
    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft);
    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitCentimeter);
    string fontName = gdpicturePDF.AddStandardFont(PdfStandardFont.PdfStandardFontTimesBold);
    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)
    {
        int startPosDraw = 0, startPosH = 0;
        string text = "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.";
        if ((gdpicturePDF.NewPage(PdfPageSizes.PdfPageSizeA4) == GdPictureStatus.OK) &&
            (gdpicturePDF.SetFillColor(0, 0, 255) == GdPictureStatus.OK) &&
            (gdpicturePDF.SetTextSize(20) == GdPictureStatus.OK) &&
            (gdpicturePDF.SetLineWidth(0.01f) == GdPictureStatus.OK) &&
            (gdpicturePDF.DrawRectangle(2, 2, 6, 6, false, true) == GdPictureStatus.OK) &&
            (gdpicturePDF.DrawWrappedText(fontName, 2, 2, 8, 8, TextAlignment.TextAlignmentCenter, text, false, ref startPosDraw) == GdPictureStatus.OK) &&
            (gdpicturePDF.DrawText(fontName, 3, 9, "StartPos = " + startPosDraw.ToString()) == GdPictureStatus.OK))
        {
            float height = gdpicturePDF.GetWrappedTextHeight(fontName, 2, 2, 8, 8, TextAlignment.TextAlignmentCenter, text, false, ref startPosH);
            if ((gdpicturePDF.GetStat() == GdPictureStatus.OK) &&
                (gdpicturePDF.DrawText(fontName, 3, 11, "Height = " + height.ToString()) == GdPictureStatus.OK))
            {
                startPosDraw = 0;
                if ((gdpicturePDF.DrawRectangle(10, 2, 6, 6, false, true) == GdPictureStatus.OK) &&
                    (gdpicturePDF.DrawWrappedText(fontName, 10, 2, 16, 8, TextAlignment.TextAlignmentCenter, text, true, ref startPosDraw) == GdPictureStatus.OK) &&
                    (gdpicturePDF.DrawText(fontName, 11, 9, "StartPos = " + startPosDraw.ToString()) == GdPictureStatus.OK))
                {
                    height = gdpicturePDF.GetWrappedTextHeight(fontName, 2, 2, 8, 8, TextAlignment.TextAlignmentCenter, text, true, ref startPosH);
                    if ((gdpicturePDF.GetStat() == GdPictureStatus.OK) &&
                        (gdpicturePDF.DrawText(fontName, 11, 11, "Height = " + height.ToString()) == GdPictureStatus.OK))
                    {
                        status = gdpicturePDF.SaveToFile("test_DrawWrappedText.pdf");
                        if (status == GdPictureStatus.OK)
                            message = "The example has been followed successfully and the file has been saved.";
                        else
                            message = "The example has been followed successfully, but the file can't be saved. Status: " + status.ToString();
                    }
                    else
                        message = message + gdpicturePDF.GetStat().ToString();
                }
                else
                    message = message + gdpicturePDF.GetStat().ToString();
            }
            else
                message = message + gdpicturePDF.GetStat().ToString();
        }
        else
            message = message + gdpicturePDF.GetStat().ToString();
    }
    else
        message = "The AddStandardFont() method has failed with the status: " + status.ToString();
}
else
    message = "The NewPDF() method has failed with the status: " + status.ToString();
MessageBox.Show(message, caption);
gdpicturePDF.Dispose();
See Also