GdPicture.NET.14
GdPicture14 Namespace / GdPictureImaging Class / BarcodeMicroQRReaderDoScan Method / BarcodeMicroQRReaderDoScan(Int32,BarcodeQRReaderScanMode,Int32) Method
A unique image identifier of the GdPicture image representing the image in use.
A member of the BarcodeQRReaderScanMode enumeration. The scan mode (speed or quality) used for scanning process.
Specifies the maximum number of barcodes expected to be detected. Use 0 to find all available barcodes within an image.
Example





In This Topic
BarcodeMicroQRReaderDoScan(Int32,BarcodeQRReaderScanMode,Int32) Method
In This Topic
Starts a barcode recognition process on a specified GdPicture image or on an area of a specified GdPicture image defined by the SetROI method. Starts a barcode recognition process on a GdPicture image or on an area of a GdPicture image using different parameters according to what you have specified. This method allows you to set the scanning mode parameter as well as to define the required number of barcodes the engine should detect.
Syntax
'Declaration
 
Public Overloads Function BarcodeMicroQRReaderDoScan( _
   ByVal ImageID As Integer, _
   ByVal ScanMode As BarcodeQRReaderScanMode, _
   ByVal ExpectedCount As Integer _
) As GdPictureStatus
public GdPictureStatus BarcodeMicroQRReaderDoScan( 
   int ImageID,
   BarcodeQRReaderScanMode ScanMode,
   int ExpectedCount
)
public function BarcodeMicroQRReaderDoScan( 
    ImageID: Integer;
    ScanMode: BarcodeQRReaderScanMode;
    ExpectedCount: Integer
): GdPictureStatus; 
public function BarcodeMicroQRReaderDoScan( 
   ImageID : int,
   ScanMode : BarcodeQRReaderScanMode,
   ExpectedCount : int
) : GdPictureStatus;
public: GdPictureStatus BarcodeMicroQRReaderDoScan( 
   int ImageID,
   BarcodeQRReaderScanMode ScanMode,
   int ExpectedCount
) 
public:
GdPictureStatus BarcodeMicroQRReaderDoScan( 
   int ImageID,
   BarcodeQRReaderScanMode ScanMode,
   int ExpectedCount
) 

Parameters

ImageID
A unique image identifier of the GdPicture image representing the image in use.
ScanMode
A member of the BarcodeQRReaderScanMode enumeration. The scan mode (speed or quality) used for scanning process.
ExpectedCount
Specifies the maximum number of barcodes expected to be detected. Use 0 to find all available barcodes within an image.

Return Value

A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK. We strongly recommend always checking this status first.
Remarks
For more details, please refer to our Barcode Recognition Sample included in the installation folder that demonstrates the usage of this method.

This method requires the Barcode Reading & Writing component to run.

Example
Finding Micro Qr Code barcodes in an image and writing complete barcodes info into a file.
using (GdPictureImaging gdpictureImaging = new GdPictureImaging())
{
    int imageID = gdpictureImaging.CreateGdPictureImageFromFile("image.jpg", false);
 
    // Set to 0, so all the Micro QR Codes in the image should be found.
    int expectedBarcodes = 0;
 
    // Perform scanning at best speed, ignoring very damaged barcodes.
    BarcodeQRReaderScanMode mode = BarcodeQRReaderScanMode.BestSpeed;
 
    // Start the Micro Qr Code scanning process and write info into a text file.
    gdpictureImaging.BarcodeMicroQRReaderDoScan(imageID, mode, expectedBarcodes);
 
    using (System.IO.StreamWriter file = new System.IO.StreamWriter("MicroQrCodes.txt"))
    {
        int barcodesFound = gdpictureImaging.BarcodeMicroQRReaderGetBarcodeCount();
 
        for (int i = 1; i <= barcodesFound; i++)
        {
            // Decoded information.
            file.WriteLine("Decoded info = " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeValue(i));
 
            // The skew angle of the barcode, in degrees.
            file.WriteLine("Skew angle = " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeSkewAngle(i));
 
            // Confidence in result, in percentage (values from 0 to 100).
            file.WriteLine("Confidence = " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeConfidence(i));
 
            // The version of a Micro Qr Code, in range 1-4. The higher the version, the larger the barcode is.
            file.WriteLine("Version = " + gdpictureImaging.BarcodeMicroQRReaderGetVersion(i));
 
            // The barcode position, given by the coordinates of the corners.
            file.WriteLine("Position =  Top-Left=["
                + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeX1(i) + ", " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeY1(i)
                + "] Top-Right=[" + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeX2(i) + ", " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeY2(i)
                + "] Bottom-Right=[" + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeX3(i) + ", " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeY3(i)
                + "] Bottom-Left=[" + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeX4(i) + ", " + gdpictureImaging.BarcodeMicroQRReaderGetBarcodeY4(i) + "]");
        }
    }
 
    // Release used resources.
    gdpictureImaging.BarcodeMicroQRReaderClear();
    gdpictureImaging.ReleaseGdPictureImage(imageID);
}
See Also