GdPicture.NET.14.API
GdPicture14 Namespace / GdPicturePDF Class / DrawImage Method
The image resource name of the required image as a string.

You can obtain this name using one of these methods: %AddImageFromBitmap(Bitmap, bool, bool)% , GdPicturePDF.AddImageFromGdPictureImage, GdPicturePDF.GetPageImageResName or any of the AddJpegImageFrom...() methods. For further assistance, please see the Images section of the GdPicturePDF class in the Reference Guide.

The horizontal (X) coordinate of the bottom left point of the destination area, where the image is to be drawn, expressed in the current units specified by the SetMeasurementUnit method, related to the currently selected page.
The vertical (Y) coordinate of the bottom left point of the destination area, where the image is to be drawn, expressed in the current units specified by the SetMeasurementUnit method, related to the currently selected page.
The width of the destination area, expressed in the current units specified by the SetMeasurementUnit method.
The height of the destination area, expressed in the current units specified by the SetMeasurementUnit method.
Example





In This Topic
DrawImage Method (GdPicturePDF)
In This Topic
Draws an image, specified by its resource name, onto the exactly defined area of the currently selected page of the loaded PDF document. The image already needs to be included in the current document as a resource using one of the AddImage... methods().

The coordinates and the dimensions of the destination area need to be set in the current units defined in the PDF document, related to the actual page, where the required image is to be drawn. You can use the GdPicturePDF.GetMeasurementUnit method to determine the currently defined units and you can use the GdPicturePDF.SetMeasurementUnit method to reset the units according to your preference.

Syntax
'Declaration
 
Public Function DrawImage( _
   ByVal ImageResName As String, _
   ByVal DstX As Single, _
   ByVal DstY As Single, _
   ByVal Width As Single, _
   ByVal Height As Single _
) As GdPictureStatus
public GdPictureStatus DrawImage( 
   string ImageResName,
   float DstX,
   float DstY,
   float Width,
   float Height
)
public function DrawImage( 
    ImageResName: String;
    DstX: Single;
    DstY: Single;
    Width: Single;
    Height: Single
): GdPictureStatus; 
public function DrawImage( 
   ImageResName : String,
   DstX : float,
   DstY : float,
   Width : float,
   Height : float
) : GdPictureStatus;
public: GdPictureStatus DrawImage( 
   string* ImageResName,
   float DstX,
   float DstY,
   float Width,
   float Height
) 
public:
GdPictureStatus DrawImage( 
   String^ ImageResName,
   float DstX,
   float DstY,
   float Width,
   float Height
) 

Parameters

ImageResName
The image resource name of the required image as a string.

You can obtain this name using one of these methods: %AddImageFromBitmap(Bitmap, bool, bool)% , GdPicturePDF.AddImageFromGdPictureImage, GdPicturePDF.GetPageImageResName or any of the AddJpegImageFrom...() methods. For further assistance, please see the Images section of the GdPicturePDF class in the Reference Guide.

DstX
The horizontal (X) coordinate of the bottom left point of the destination area, where the image is to be drawn, expressed in the current units specified by the SetMeasurementUnit method, related to the currently selected page.
DstY
The vertical (Y) coordinate of the bottom left point of the destination area, where the image is to be drawn, expressed in the current units specified by the SetMeasurementUnit method, related to the currently selected page.
Width
The width of the destination area, expressed in the current units specified by the SetMeasurementUnit method.
Height
The height of the destination area, expressed in the current units specified by the SetMeasurementUnit method.

Return Value

A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.

We strongly recommend always checking this status first.

Remarks
This method is only allowed for use with non-encrypted documents.

Just to remind you that if the image to draw is a Mask Image, you should define the color for non-stroking operations by using the GdPicturePDF.SetFillColor method.

Be aware that DstX and DstY parameters are fixly determined as the coordinates of the bottom left point of the destination area on the actual page.

We also recommend to take advantage of the GdPictureImaging class and its methods for further manipulation with images.

Example
These examples show you how to draw an image loaded from different resources using different methods - the first image is loaded from the external file and the second image is loaded from the current PDF document.
How to draw a jpeg image, loaded from the external file, onto the first page of the newly created PDF document twice, side by side, within the two same-sized areas.
Dim caption As String = "Example: DrawImage"
Dim gdpicturePDF As New GdPicturePDF()
If (gdpicturePDF.NewPDF() = GdPictureStatus.OK) AndAlso
   (gdpicturePDF.NewPage(PdfPageSizes.PdfPageSizeA4) = GdPictureStatus.OK) Then
    Dim image_name As String = gdpicturePDF.AddJpegImageFromFile("image.jpg")
    If gdpicturePDF.GetStat() = GdPictureStatus.OK Then
        Dim width As Single = gdpicturePDF.GetPageWidth()
        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then
            Dim height As Single = gdpicturePDF.GetPageHeight()
            If gdpicturePDF.GetStat() = GdPictureStatus.OK Then
                'the new height of the destination area
                height = height / 2
                If (gdpicturePDF.SelectPage(1) = GdPictureStatus.OK) AndAlso
                   (gdpicturePDF.DrawImage(image_name, 0, 0, width, height) = GdPictureStatus.OK) AndAlso
                   (gdpicturePDF.DrawImage(image_name, 0, height, width, height) = GdPictureStatus.OK) Then
                    Dim status As GdPictureStatus = gdpicturePDF.SaveToFile("test_DrawImage.pdf")
                    If status = GdPictureStatus.OK Then
                        MessageBox.Show("The example has been followed successfully and the file has been saved.", caption)
                    Else
                        MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption)
                    End If
                Else
                    MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)
                End If
            Else
                MessageBox.Show("The GetPageHeight() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)
            End If
        Else
            MessageBox.Show("The GetPageWidth() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)
        End If
    Else
        MessageBox.Show("The AddJpegImageFromFile() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)
    End If
Else
    MessageBox.Show("The NewPDF() method or the NewPage() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption)
End If
gdpicturePDF.Dispose()
string caption = "Example: DrawImage";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
if ((gdpicturePDF.NewPDF() == GdPictureStatus.OK) &&
    (gdpicturePDF.NewPage(PdfPageSizes.PdfPageSizeA4) == GdPictureStatus.OK))
{
    string image_name = gdpicturePDF.AddJpegImageFromFile("image.jpg");
    if (gdpicturePDF.GetStat() == GdPictureStatus.OK)
    {
        float width = gdpicturePDF.GetPageWidth();
        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)
        {
            float height = gdpicturePDF.GetPageHeight();
            if (gdpicturePDF.GetStat() == GdPictureStatus.OK)
            {
                //the new height of the destination area
                height = height / 2;
                if ((gdpicturePDF.SelectPage(1) == GdPictureStatus.OK) &&
                    (gdpicturePDF.DrawImage(image_name, 0, 0, width, height) == GdPictureStatus.OK) &&
                    (gdpicturePDF.DrawImage(image_name, 0, height, width, height) == GdPictureStatus.OK))
                {
                    GdPictureStatus status = gdpicturePDF.SaveToFile("test_DrawImage.pdf");
                    if (status == GdPictureStatus.OK)
                        MessageBox.Show("The example has been followed successfully and the file has been saved.", caption);
                    else
                        MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption);
                }
                else
                    MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);
            }
            else
                MessageBox.Show("The GetPageHeight() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);
        }
        else
            MessageBox.Show("The GetPageWidth() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);
    }
    else
        MessageBox.Show("The AddJpegImageFromFile() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);
}
else
    MessageBox.Show("The NewPDF() method or the NewPage() method has failed with the status: " + gdpicturePDF.GetStat().ToString(), caption);
gdpicturePDF.Dispose();
How to draw an image, loaded from the first page of the current PDF document, onto the newly inserted page, which has the same size as the first page, within the same PDF document.
Dim caption As String = "Example: DrawImage"
Dim message As String = ""
Dim gdpicturePDF As New GdPicturePDF()
Dim status As GdPictureStatus = gdpicturePDF.LoadFromFile("test_images.pdf", True)
If status = GdPictureStatus.OK Then
    Dim pageCount As Integer = gdpicturePDF.GetPageCount()
    If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then
        GoTo [error]
    End If
    If gdpicturePDF.SelectPage(1) <> GdPictureStatus.OK Then
        GoTo [error]
    End If
    Dim imageCount As Integer = gdpicturePDF.GetPageImageCount()
    If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then
        GoTo [error]
    End If
    If imageCount > 0 Then
        Dim imageName As String = gdpicturePDF.GetPageImageResName(0)
        If gdpicturePDF.GetStat() = GdPictureStatus.OK Then
            Dim width As Single = gdpicturePDF.GetPageWidth()
            If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then
                GoTo [error]
            End If
            Dim height As Single = gdpicturePDF.GetPageHeight()
            If gdpicturePDF.GetStat() <> GdPictureStatus.OK Then
                GoTo [error]
            End If
            If (gdpicturePDF.InsertPage(width, height, pageCount + 1) = GdPictureStatus.OK) AndAlso
               (gdpicturePDF.DrawImage(imageName, 0, 0, width, height) = GdPictureStatus.OK) Then
                status = gdpicturePDF.SaveToFileInc("test_images.pdf")
                If status = GdPictureStatus.OK Then
                    message = "The example has been followed successfully and the file has been saved."
                Else
                    message = "The example has been followed successfully, but the SaveToFileInc() method has failed with the status: " + status.ToString()
                End If
            End If
        Else
            message = "The GetPageImageResName() method has failed with the status: " + gdpicturePDF.GetStat().ToString()
        End If
    Else
        message = "The first page of this document doesn't contain any image."
    End If
Else
    message = "The LoadFromFile() method has failed with the status: " + status.ToString()
End If
[error]:
If message.Equals("") Then
    message = "The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString()
End If
MessageBox.Show(message, caption)
gdpicturePDF.Dispose()
string caption = "Example: DrawImage";
string message = "";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
GdPictureStatus status = gdpicturePDF.LoadFromFile("test_images.pdf", true);
if (status == GdPictureStatus.OK)
{
    int pageCount = gdpicturePDF.GetPageCount();
    if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;
    if (gdpicturePDF.SelectPage(1) != GdPictureStatus.OK) goto error;
    int imageCount = gdpicturePDF.GetPageImageCount();
    if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;
    if (imageCount > 0)
    {
        string imageName = gdpicturePDF.GetPageImageResName(0);
        if (gdpicturePDF.GetStat() == GdPictureStatus.OK)
        {
            float width = gdpicturePDF.GetPageWidth();
            if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;
            float height = gdpicturePDF.GetPageHeight();
            if (gdpicturePDF.GetStat() != GdPictureStatus.OK) goto error;
            if ((gdpicturePDF.InsertPage(width, height, pageCount + 1) == GdPictureStatus.OK) &&
                (gdpicturePDF.DrawImage(imageName, 0, 0, width, height) == GdPictureStatus.OK))
            {
                status = gdpicturePDF.SaveToFileInc("test_images.pdf");
                if (status == GdPictureStatus.OK)
                    message = "The example has been followed successfully and the file has been saved.";
                else
                    message = "The example has been followed successfully, but the SaveToFileInc() method has failed with the status: " + status.ToString();
            }
        }
        else
            message = "The GetPageImageResName() method has failed with the status: " + gdpicturePDF.GetStat().ToString();
    }
    else
        message = "The first page of this document doesn't contain any image.";
}
else
    message = "The LoadFromFile() method has failed with the status: " + status.ToString();
error:
if (message.Equals(""))
    message = "The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString();
MessageBox.Show(message, caption);
gdpicturePDF.Dispose();
See Also